Description
| Fuel type : | Dry cordwood |
| Heating area : | 500 – 1,800 Ft2 |
| Maximum heat output : | 65,000 BTU/h (19 kW) |
OSBURN 1700 WOOD STOVE
Shown with 4 black legs and black glass door overlay. Add $280.00 for Nickel coated legs and nickel coated glass door overlay. (blower not available). Price does not include installation charges, or venting requirements, or accessories.
Designed to meet the needs of smaller spaces, the Osburn 1700 combines robustness and elegance to allow you to enjoy your heating experience with confidence. This unit is equipped with high-density bricks, a cast iron door, a built-in ash pan, a top heat deflector that redirects heat to the front of the unit, and side panels to reduce its clearances.
Choose your favorite version by customizing the unit to suit your style: refined door overlays, new leg designs, glass ash lip; significant innovations for the most seasoned experts. Exceeding air quality regulations with emissions as low as 1.26 g/h, the Osburn 1700’s efficiency will save you time and money.
APPLIANCE PERFORMANCE
APPLIANCE PERFORMANCE (1)
| Fuel type : | Dry cordwood | |
| Recommended heating area (sq.ft.) : () | 500 – 1,800 | |
| Overall firebox volume : | 1.9 | |
| Maximum burn time : () | 6 h | |
| Maximum heat output (dry cordwood) : (2) | 65,000 BTU/h (19 kW) | |
| Overall heat output rate (min. to max.) : (2) (3) | 15,650 BTU/h (4.6 kW) to 23,300 BTU/h (6.83 kW) | |
| Average overall efficiency (EPA cribs / Douglas fir) : (3) | N.A. (HHV) (4) | N.A. (LHV) (5) |
| Average overall efficiency (dry cordwood) : (3) | 70 % (HHV) (4) | 75 % (LHV) (5) |
| Optimum efficiency : (6) (7) | 78 % | |
| Average particulate emissions rate : (8) | 1.26 g/h | |
| Average CO : (9) | 58 g/h | |
(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
() Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
(3) As measured per CSA B415.1-10 stack loss method.
(4) Higher Heating Value of the fuel.
(5) Lower Heating Value of the fuel.
(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
(7) Optimum overall efficiency at a specific burn rate (LHV).
(8) This appliance is officially tested and certified by an independent agency.
(9) Carbon monoxyde.
GENERAL FEATURES
| idth) | 17 1/4″ |
| Firebox – dimension (Height) | 11 7/8″ |
| Firebox – dimension (Width) | 19 5/8″ |
| Firebox – dimension (Depth) | 13 1/2″ |
| Firebox lined with refractory bricks for better heat distribution | Yes |
| Stainless-steel secondary-air system improving gas combustion | Yes |
| Steel thickness – body | 3/16″ |
| Steel thickness – top | 5/16″ |
| USA standard (emissions) | EPA |
| Canadian Standard (emissions) | CSA B415.1-10 |
| USA standard (safety) | UL 1482, UL 737 |
| Canadian standard (safety) | ULC S627 |
| Tested and listed as per applicable standards | By an accredited laboratory (CAN/USA) |
| Warranty | Limited lifetime |
| Minimum clearances to combustibles* (Data expressed in inches. 1 inch = 25.4 mm) |
||||
| Canada | United-States | |||
| Single wall pipe | Double wall pipe | Single wall pipe | Double wall pipe | |
| Clearance – back wall | 14 1/2″ | 6″ | 13″ | 6″ |
| Clearance – placed in a corner | 12″ | 12″ | 12″ | 12″ |
| Clearance – side wall | 10″ | 10″ | 10″ | 10″ |
| Clearance – top (measured from the platform on which the appliance is installed)** | 84″ | 84″ | 84″ | 84″ |
| Clearance – minimum floor protection in front of the appliance | 18″ | 16″ | ||
|
* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner’s manual, catalogues, flyers, magazines and/or web sites). |
||||
|
** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual. |
||||
